QTY. 1. FANN INSTRUMENT COMPANY FILTER PRESS SERIES 300, GAUGE 0-160 PSI, 0-0-1100 KPA, MAX INLET 3000 PSI, 2) FILTER SCREENS, 1) 400 ML SAMPLE CUP WITH EXTRA BOTTOM, 1) CENTER PUNCH TOOL, 1) PAIR OF NEEDLE NOSE PLYERS, 3) WRENCHES, 5/16", 13/16" AND 15/16", 1) TRUE FLAME TIP CLEANER, 1) EMPTY CROSSMAN CO2 GAS CONTAINER, 1) EXTRA SLEEVE AND BOLT, 6) L SHAPED. RODS, ALL IN TOOL BOX.THE FANN 300 SERIES FILTER PRESS IS AN AMERICAN PETROLEUM INSTITUTE (API) STANDARD FILTER PRESS USED TO MEASURE THE FILTRATION PROPERTIES OF DRILLING FLUIDS. IT OPERATES WITH A WORKING PRESSURE OF 100 PSIG AND A 7.1 SQUARE INCH FILTRATION AREA, ALLOWING FOR LOW-PRESSURE/LOW-TEMPERATURE (LPLT) TESTING AS DESCRIBED IN API RECOMMENDED PRACTICE 13B-1 AND 13B-2. THE SYSTEM USES PRESSURE FROM SOURCES LIKE CARBON DIOXIDE (CO2) CARTRIDGES OR CYLINDERS, NITROGEN, COMPRESSED AIR, OR A HYDRAULIC DEAD-WEIGHT ASSEMBLY TO FILTER THE FLUID THROUGH FILTER PAPER ONTO A GRADUATED CYLINDER. THE FANN 300 SERIES FILTER PRESS IS AN AMERICAN PETROLEUM INSTITUTE (API) STANDARD FILTER PRESS USED TO MEASURE THE FILTRATION PROPERTIES OF DRILLING FLUIDS. IT OPERATES WITH A WORKING PRESSURE OF 100 PSIG AND A 7.1 SQUARE INCH FILTRATION AREA, ALLOWING FOR LOW-PRESSURE/LOW-TEMPERATURE (LPLT) TESTING AS DESCRIBED IN API RECOMMENDED PRACTICE 13B-1 AND 13B-2. THE SYSTEM USES PRESSURE FROM SOURCES LIKE CARBON DIOXIDE (CO2) CARTRIDGES OR CYLINDERS, NITROGEN, COMPRESSED AIR, OR A HYDRAULIC DEAD-WEIGHT ASSEMBLY TO FILTER THE FLUID THROUGH FILTER PAPER ONTO A GRADUATED CYLINDER.